Introduction
Lipids are a heterogeneous group of compounds synthesized by organisms that are present in all biological tissues.
These compounds are characterized as natural substances that do not mix with water but dissolve in organic solvents.
There are several classes of lipids, including: fatty acids, waxes, triacylglycerols, phospholipis. terpens and steroids.
Material
-Test tube rack
-250mL beaker
-water
-Test tube rack
-Cellulose paper
-Dropper
-Scissors
-Glass rod
-Olive oil
-Soap (detergent)
-Milk with different fat content: full-cream, semiskimmed, and skimed milk.
-Petroleum ether
-Ethanol
-Sudan III
Objectives
1. Test the solubility of lipids.
2. Identify lipids in liquids compounds.
3. Understan what are an emulsion ant the effect of detergents.
Procedure
Solubility of some lipids:
1.Clean and dry three test tube. Label as w (water), E (ethanol), PE (ethet).
2.Add 3 dropps of oleic acid to 3 small test tube.
3.Add 1mL of water in the first test tube (W).
4.Ads 1mL of ethanol in the second test tube.
5.Add 1mL ot petroleum ether in the third test tube (PE).
6.Shake carefully each test tube and record solubility and observations in your worksheet.
Observations:
-The water inthe first test tube create a monolayer and the ethanol and ethet dissolved.
Lipids identification:
Translucent mark:
7.Cut two pieces (10x10cm) of cellulose paper.
8.Put 1 drop of water in the first squared pices. You will see a transluced spot. Wait for a while and observed what is happening.
9.Put 1 drop of olive oil in thesecond squared pieces ofcellulose paper. You will see a translucent spot. Wait for a while andpbserve what is happening. Has the spot disappeared? Why?
Sudan III dye:
Sudan III is a red fat-soluble dye that is utilized in the identification of presence of lipids, triglycerides and lipoproteins in liquids.
10.Take the W test tube of the first experiment and add 2 drops of Sudan III.
11.Prepared four test tubes: 3 with milk with differents fat content (M1, M2, M3) an soda (S). Add two drops of Sudan III and observe the results.
Observations:
-We can see that the colous of the oil change bacause it hasfatty acids. The water doesn't change the colour because doesn't have fats.
Permanent emulsion:
12.Take a 250mL beaker and put 100mL of water.
13.Add 1mL of olive oil. With a glass rod stir the mixture vigorously and let it stand for a few minutes.
14.Make note of what is happening.
15.Add 2 dropps of soap and stir the mixtue again. Let it stand for a few minutes and notice the differents between both mixture.
Observations:
Water whith olive oil. We can see that whenwe stir the water with oil, the oil never dissolved the micelles come together.
Water with oil and soap. The micelles are not together because there are soap and create a membrane that don't f¡let the micelles come together.
Es mostren els missatges amb l'etiqueta de comentaris properties. Mostrar tots els missatges
Es mostren els missatges amb l'etiqueta de comentaris properties. Mostrar tots els missatges
diumenge, 15 de novembre del 2015
1.8 Lipids properties
Etiquetes de comentaris:
ethanol,
lipids,
milk,
oil,
petroleum ether,
properties,
Sudan III
diumenge, 8 de novembre del 2015
1.5 Saccharides properties
Introduction
Saccharides are organic molecules consisting of C, H and O atoms; and the empirical formula is Cn H2n On.
Are divided into thte goups:
-Monosaccharides: formed by a linear carbon chain, the oligo and polysaccharides are formed by these.
They have a one funcional group: cetone (C=O) or aldehyde (COH).
Pentoses and hexoses in dissolution can cyclic forming shapes called furanoses and pyranosres.
-Oligosaccharides: small polymer containing between 2 and 10 monosaccharides.
-Polysaccharides: big polymers with more than 10 monosaccharides.
These molecules perform numerous roles in living organisms like storage if energy, structural components .
Saccharides yield 4,2 Kcal/g. They are a common source of eneregy in living organisms.
Materials
-Test tube rack
-10 mL pipet
-Distilled water
-5 test tube
-1 dropper
-5 spatula
-Lactose
-Maltose
-Glucose
-Sucrose
-Starch
-Lugol's iodine
Objectives
1.Identify differents sugars from it's properties.
2.Differentiate monoand disaccharides.
3.Understand the relation bettween structure and some properties.
Procedure
1.In the firspartof the experiment we are going to test some physcal properties of the saccharides you have in the lab: flavour, crysta structure and colour. How?
a. Flavour:Put a small amount of each saccharides in your hand and test it! Is it sweet or not sweet?
b. Crystals: Observe a small amount of each saccharide on a clock glass under magnification.
c. Colour: White, transparent or creamy.
The propierties of 5 saccharides:
To test solubility:
2. Clean and dry 5 test tubes and label them "G, M, L, SU, S"
3. Put 5 mL of water in each test tube.
4. With the aid of a spatula, put a small amount of each saccharide inside the labelles test tube and test if they are soluble or insoluble.
5. Observe if each saccharide forms a mixture called dissolution or a colloidal suspension.
Lugol's iodine Test:
6. Finally, add 2 drops of Lugol's iodine to each test tube and test if the reaction is positive or negative. Lugol's is a solution of elemental iodine (I) and potassium iodine (KI) in water that is use to test a saccharide. The reaction is positive when iodine reacts by turning from yellow to a purple, dark-blue/dark colour.
Finally we are going to test if some foods contain starch. Try with potato!
1. Add 2 or 3 drops of Lugol's solution to one piece of potato observe what is happening.
Observations
We can see that different test tube we put lugol's iodine, and one is in the different colour, is ti the strach (positive).
Questions
1.Write the empirical formula of each saccharide thet you have use. Show structures ofthe five saccharides.Classify each one in one group: mono, oligo, or polysaccharide.
-
2.Which of the monosaccharide are aldoses and wich are cetoses?
-
3.Which bond links monosaccharide?
-
4.Which saccharide/s is/are sweet? Is this property related to the structure of the molecules?
-
5.Whichsaccharide/s is/are insoluble? Is this property related to the structure of the molecules?
-
6.Which saccharide has reacted whith Lugol's iodine solution?
-
7.Which kind of food contains starch?
-
8.Calculate the energy from the nutrition facts label from a cereals:
a.Calculate the energy that comes from the saccharides.
b.Which % of the total energy comes from the saccharides?
Saccharides are organic molecules consisting of C, H and O atoms; and the empirical formula is Cn H2n On.
Are divided into thte goups:
-Monosaccharides: formed by a linear carbon chain, the oligo and polysaccharides are formed by these.
They have a one funcional group: cetone (C=O) or aldehyde (COH).
Pentoses and hexoses in dissolution can cyclic forming shapes called furanoses and pyranosres.
-Oligosaccharides: small polymer containing between 2 and 10 monosaccharides.
-Polysaccharides: big polymers with more than 10 monosaccharides.
These molecules perform numerous roles in living organisms like storage if energy, structural components .
Saccharides yield 4,2 Kcal/g. They are a common source of eneregy in living organisms.
Materials
-Test tube rack
-10 mL pipet
-Distilled water
-5 test tube
-1 dropper
-5 spatula
-Lactose
-Maltose
-Glucose
-Sucrose
-Starch
-Lugol's iodine
Objectives
1.Identify differents sugars from it's properties.
2.Differentiate monoand disaccharides.
3.Understand the relation bettween structure and some properties.
Procedure
1.In the firspartof the experiment we are going to test some physcal properties of the saccharides you have in the lab: flavour, crysta structure and colour. How?
a. Flavour:Put a small amount of each saccharides in your hand and test it! Is it sweet or not sweet?
b. Crystals: Observe a small amount of each saccharide on a clock glass under magnification.
c. Colour: White, transparent or creamy.
The propierties of 5 saccharides:
To test solubility:
2. Clean and dry 5 test tubes and label them "G, M, L, SU, S"
3. Put 5 mL of water in each test tube.
4. With the aid of a spatula, put a small amount of each saccharide inside the labelles test tube and test if they are soluble or insoluble.
5. Observe if each saccharide forms a mixture called dissolution or a colloidal suspension.
Lugol's iodine Test:
6. Finally, add 2 drops of Lugol's iodine to each test tube and test if the reaction is positive or negative. Lugol's is a solution of elemental iodine (I) and potassium iodine (KI) in water that is use to test a saccharide. The reaction is positive when iodine reacts by turning from yellow to a purple, dark-blue/dark colour.
Finally we are going to test if some foods contain starch. Try with potato!
1. Add 2 or 3 drops of Lugol's solution to one piece of potato observe what is happening.
Observations
We can see that different test tube we put lugol's iodine, and one is in the different colour, is ti the strach (positive).
Questions
1.Write the empirical formula of each saccharide thet you have use. Show structures ofthe five saccharides.Classify each one in one group: mono, oligo, or polysaccharide.
-
2.Which of the monosaccharide are aldoses and wich are cetoses?
-
3.Which bond links monosaccharide?
-
4.Which saccharide/s is/are sweet? Is this property related to the structure of the molecules?
-
5.Whichsaccharide/s is/are insoluble? Is this property related to the structure of the molecules?
-
6.Which saccharide has reacted whith Lugol's iodine solution?
-
7.Which kind of food contains starch?
-
8.Calculate the energy from the nutrition facts label from a cereals:
a.Calculate the energy that comes from the saccharides.
b.Which % of the total energy comes from the saccharides?
Etiquetes de comentaris:
glucose,
lactose,
lugol's iodine,
maltose,
properties,
Saccharides,
starch,
sucrose
Subscriure's a:
Missatges (Atom)